patka Posted May 1, 2009 Share Posted May 1, 2009 Greetings, I wanted to ask what type of container everyone uses for making lye solution? I had a glass container (which was heat resistant, at least to a boiling point) crack today (I had it sat in the sink of course, as a precaution) with a 30% lye solution, which got really hot. I had tried a sturdy plastic, but it got damaged by the heat too. I know stainless steel would be fine temperaturewise, but I was trying to avoid metal, somehow I feel the metal could leach from the stainless steel into the soap (I may be wrong on that). I do use a SS pot for mixing the soap, but not for the straight lye solution. I would love to know what you all use for this purpose. Thanks a lot! Quote Link to comment Share on other sites More sharing options...
MarieJeanette Posted May 1, 2009 Share Posted May 1, 2009 To mix my lye, I use Polypropylene (PP)- it has the #5 stamped in the recycle triangle on the bottom of the container. I've read that this is one of the best plastics to use when mixing lye. It stands up very well to lye and heat. The plastics to stay away from with lye solutions are PETE #1 and also PS #6. I've used PETE #1 before and can attest that the lye solution eats it up for lunch and then pops the bag. I'd stay away from glass, too, as you just discovered. The lye solution etches the glass and makes it weaker and prone to breakage.Many people use stainless steel to mix their lye solution in with great results. I've heard that it should be good quality stainless steel, but I'm not sure of the gauge. Maybe someone who uses stainless steel will chime in on that as I only use it to mix my soap in and not to mix my lye solution in. HTH! MarieJeanette Quote Link to comment Share on other sites More sharing options...
sudsnwicks Posted May 1, 2009 Share Posted May 1, 2009 Patka, I use a plastic container and have not had any problems with heat damage. Is your water cold to start with? It will certainly help if your liquid is cold to start with. Then the lye solution would not get quite as hot. Quote Link to comment Share on other sites More sharing options...
Sister Kya Posted May 1, 2009 Share Posted May 1, 2009 Plastics come in several grades so one bad experience with plastic shouldn't be the end of it.I use an old rubbermaid pitcher I got at goodwill for a dime. It's tough stuff and works great. I would never use glass. Seen that idea end badly one too many times... Quote Link to comment Share on other sites More sharing options...
Meridith Posted May 1, 2009 Share Posted May 1, 2009 I use a plastic pitcher that I purchased at Wally world several years back. Quote Link to comment Share on other sites More sharing options...
patka Posted May 2, 2009 Author Share Posted May 2, 2009 Thank you all, I will take your advice and go look for a plastic pitcher. The one I used a while back that did not take the heat was the hard plastic, kind of like plexiglass. It cracked, although it did not leak, so I managed to use the liquid, but did not use it again. I will look for the #5 plastic. I use cold water for the solution, but it still got way too hot I guess for the glass jug. Thanks again:) Quote Link to comment Share on other sites More sharing options...
topofmurrayhill Posted May 2, 2009 Share Posted May 2, 2009 Yes polypropylene will work fine. It's probably the best choice besides stainless steel. Personally I avoid using metal "just in case." Thick Pyrex containers might work OK if all you do is mix and pour, but they will get etched if the lye is left sitting in them. NaOH reacts with glass. Quote Link to comment Share on other sites More sharing options...
8-GRAN-ONES Posted May 2, 2009 Share Posted May 2, 2009 I use an old rubbermaid pitcher gallon size..i would be a little afraid to use glass..if it ever broke, it would sure be scary with all that lye water going everywhere.. Quote Link to comment Share on other sites More sharing options...
patka Posted May 2, 2009 Author Share Posted May 2, 2009 I really appreciate the feedback. It is new info for me that lye could damage glass. I always thought glass was a somehow universally inert material. Well, I have learned my lesson now and will use the suggested plastic for my lye solution.8-Gran, I had put the glass jug into a stainless steel container and both in my kitchen sink, before I started mixing the solution, so I did not have the lye running loose, thankfully. The jug lasted me a year, but I am done with experimenting with a glass container for lye solution. Quote Link to comment Share on other sites More sharing options...
Carrie Posted May 3, 2009 Share Posted May 3, 2009 I use a really old tupperware container. I think it's some type of pitcher or shaker or something. Anyway, it's a lovely shade of 1970's orange and it still looks brand new. I've been using it for over 3 years now. Quote Link to comment Share on other sites More sharing options...
NewOrleansLady Posted May 3, 2009 Share Posted May 3, 2009 I have always used a pyrex measuring cup but only for the initial measuring and dissolving no storage involved. Quote Link to comment Share on other sites More sharing options...
tlc26 Posted May 3, 2009 Share Posted May 3, 2009 I use a rubbermaid pitcher with the #5 stamped on it. I made sure to label for lye use only...........make sure no one thinks it is the refrigerator water pitcher!!!! Quote Link to comment Share on other sites More sharing options...
Kimberly Posted May 3, 2009 Share Posted May 3, 2009 I have always used an 8 cup pyrex measuring cup with no problems. Been using the same one for over 4 yrs now. Quote Link to comment Share on other sites More sharing options...
adillenal Posted May 6, 2009 Share Posted May 6, 2009 I use a rigid plastic bucket that milk replacer came it. nice and sturdy. I have used the plastic tubs that lard comes in also with no problems. I would not use glass since you never know when it might decide to crack. Quote Link to comment Share on other sites More sharing options...
chuck_35550 Posted May 7, 2009 Share Posted May 7, 2009 I use a small stainless steel mixing bowl that fits into a larger stainless steel bowl that I fill with ice cubes. I keep my goats milk solution under 100 degrees while mixing the lye and I also use the cold bowl to bring my oils down to the same temp as my lye mixture. Clean up is a breeze and I don't have to worry with the lye damaging the stainless steel. Quote Link to comment Share on other sites More sharing options...
SimplyBea Posted May 7, 2009 Share Posted May 7, 2009 This is a timely post!!!I bought a glass jar from Ikea last week to use for the lye instead of the plastic jug I was using.......... now I guess I willstick tothe plastic jug or look for a stainless steel one.......Thanks for the input folks!!! Quote Link to comment Share on other sites More sharing options...
dabbledoya Posted May 9, 2009 Share Posted May 9, 2009 I use a tupperware pitcher most of the time, but once in a while a 4 cup pyrex. Quote Link to comment Share on other sites More sharing options...
Darbla Posted May 9, 2009 Share Posted May 9, 2009 I use a replacement pyrex coffee pot. I figured it was made for the heat of sitting on the heated part of a coffee maker it was sturdy enough. Quote Link to comment Share on other sites More sharing options...
topofmurrayhill Posted May 10, 2009 Share Posted May 10, 2009 I use a replacement pyrex coffee pot. I figured it was made for the heat of sitting on the heated part of a coffee maker it was sturdy enough.I'd be a little paranoid about that container, personally. Even though it's made to withstand heat, coffee carafes are thin and surely more liable to break when the lye etches the glass, which it will in time. I think the only glass containers I'd use are the thick Pyrex measuring cups. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.