rjwhite6 Posted April 12, 2010 Share Posted April 12, 2010 When you have a lot of tops to smooth at once during production, I have a timesaving tip for you.This may not work for everyone and takes care to get things adjusted for your conditions.I use my broiler.I have adjusted the oven's top rack's distance and the broil times so that I can smooth the tops of many jars at the same time. Much faster than heat gunning so many jars.You have to be carefull at first. I would not try this with a gas oven. Do not get the jar tops too close to the broil element. I have found 4 inches to be safe for me. In a totally cold oven I have found that the first set of jars usually takes 4 minutes. If the oven door was kept closed, then the second set of jars usually takes 3 minutes for me.My oven has a cook timer in addition to the regular timer. I use the cook timer for safety as the oven will shut off after the cook timer runs out. That way If I get distracted by something, I don't have a disaster. Quote Link to comment Share on other sites More sharing options...
topofmurrayhill Posted April 12, 2010 Share Posted April 12, 2010 Definitely a good idea. Other variations of this work as well. You don't strictly need to direct heat to the top of the candles. With a gas oven, you can preheat to 300 degrees, then put in a tray of candles and turn off the oven. The time to leave them in will vary, so you have to refine the technique for your situation, but it should be something like 10 minutes to smooth out the tops.If you make a lot of candles, a heat gun isn't really practical. I've heard of people setting up a table with heat lamps. Quote Link to comment Share on other sites More sharing options...
CareBear Posted April 12, 2010 Share Posted April 12, 2010 I always eye those heat lamps in fast food restaurants... Quote Link to comment Share on other sites More sharing options...
Judy, USMC Posted April 12, 2010 Share Posted April 12, 2010 I've heard of people setting up a table with heat lamps.I have one of the 4 foot long overhead lamps. I've used it to pre-heat my jars but never used it to heat the tops. The only down side with one that large is it has to be directly wired to the fuze/breaker box. In my county that required a permit and inspection plus a dedicated electrical-rated fire extinguisher within 3 feet of the lamp. Didn't know all that when I got it. Other methods for smaller batches is soooo much easier! Quote Link to comment Share on other sites More sharing options...
NewOrleansLady Posted April 12, 2010 Share Posted April 12, 2010 thanks much for this info...it will come in very very handy cause I'm adding a tiny little hex jar to my line and when I use the heat gun it sometimes scorches the wick. Quote Link to comment Share on other sites More sharing options...
Candybee Posted April 12, 2010 Share Posted April 12, 2010 I tried this before with soy and parrafin candles to melt down wax. Never thought of doing it for leveling tops. Good idea.I wonder if it would work for glow palm too? I'm not sure if it would mess with the crystal pattern. But it would sure save me time as I do several cases at a time. Quote Link to comment Share on other sites More sharing options...
Alajane Posted April 12, 2010 Share Posted April 12, 2010 Do you think it would be okay to do this with different fragrances in the oven at the same time? I carry so many different fragrances that I usually only pour 5-8 jars of each fragrance at a time (unless it's a large order of one scent, such as a fundraiser). I'm paranoid that the scents will mingle, but my mind says it's probably okay--just need reassurance!!:rolleyes2 Quote Link to comment Share on other sites More sharing options...
rjwhite6 Posted April 12, 2010 Author Share Posted April 12, 2010 I frquently do this with jars with different fragrances at once. I have not noticed any mingling. I usually leave the oven door open just a little bit though. Quote Link to comment Share on other sites More sharing options...
Alajane Posted April 13, 2010 Share Posted April 13, 2010 Gotta try it next time! I spend way too much time with my heat gun--and it's not even quality time!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.