JanetsCandles Posted June 15, 2012 Share Posted June 15, 2012 Has anyone used CO in paraffin? I'm wanting to experiment with something. I noticed a couple of my molds tend to produce a rougher surface unless I use FO in the wax. I have a couple customers that want this style of candle, but do NOT want it scented. I already have a ton of CO from my soap making, and know it can be used in soy, but no idea on ratios to try, or if it would even work in paraffin. Quote Link to comment Share on other sites More sharing options...
jeanie353 Posted June 15, 2012 Share Posted June 15, 2012 I put it in my paraffin @ 1/2 T pp. You could try 1/4 T and see if you notice a difference. Where I really like it is in soy b/c it helps smooth out the burn and gives the HT a little boost.HTH Quote Link to comment Share on other sites More sharing options...
lmc Posted June 15, 2012 Share Posted June 15, 2012 I tried a couple of times when experimenting with melts...did NOT like how it affected the color or the texture. I agree with jeannie...it works well with soy. Quote Link to comment Share on other sites More sharing options...
Sharon in KY Posted June 15, 2012 Share Posted June 15, 2012 (edited) You could try mineral oil. Maybe at the same rate as you would have used your FO. Edited June 15, 2012 by Sharon in KY Quote Link to comment Share on other sites More sharing options...
Candybee Posted June 15, 2012 Share Posted June 15, 2012 Putting a bit of crisco in your parrafin used to be the "rage" not too many years ago. I've tried it and had no problems. Just don't use too much. Maybe an oz or less per lb of wax. Another additive that might help is petrolatum. Its used by a lot of manufacturers to add to paraffin to make it soft. I've used this before and it makes your wax nice and soft, minimizes wet spots and gives the fragrance a boost. But add sparingly, follow manufacturer's directions, as too much can cause sooting. Quote Link to comment Share on other sites More sharing options...
joym Posted June 16, 2012 Share Posted June 16, 2012 I use stearic acid and vybar in my unscented paraffin wax shells and get a smooth, shiny surface. Quote Link to comment Share on other sites More sharing options...
sporadic Posted June 16, 2012 Share Posted June 16, 2012 I've never had a need to use CO. But you can use mineral oil. Sometimes a bit extra will cause beautiful mottling. Quote Link to comment Share on other sites More sharing options...
EricofAZ Posted June 19, 2012 Share Posted June 19, 2012 I used some in 4625 yesterday. Loaded it to 12 percent FO. Nice and shiney, didn't change the color. With the CO and extra FO, I surely have to wick down because the FMP was bit wide for the pillar, it spilled at the 4 hour mark. Quote Link to comment Share on other sites More sharing options...
rjdaines Posted June 19, 2012 Share Posted June 19, 2012 I used some in 4625 yesterday. Loaded it to 12 percent FO. Nice and shiney, didn't change the color. With the CO and extra FO, I surely have to wick down because the FMP was bit wide for the pillar, it spilled at the 4 hour mark.Wow, 12%, I though 6% was about max for 4625 unless you are using additives. Quote Link to comment Share on other sites More sharing options...
Gucci Posted June 23, 2012 Share Posted June 23, 2012 Putting a bit of crisco in your parrafin used to be the "rage" not too many years ago. I've tried it and had no problems. Just don't use too much. Maybe an oz or less per lb of wax. Another additive that might help is petrolatum. Its used by a lot of manufacturers to add to paraffin to make it soft. I've used this before and it makes your wax nice and soft, minimizes wet spots and gives the fragrance a boost. But add sparingly, follow manufacturer's directions, as too much can cause sooting.Lol, I've experimented with Crisco and raw paraffin as well and loved the results. And you're right, a little goes a long way. I think I was using 2 tbs per lb of wax. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.