Kayleighkehoe Posted February 15, 2020 Share Posted February 15, 2020 My soy wax melts are completely sticking to the silicon moulds? This was a test with no colour pigment or oil literally just white wax and they still stuck! The silicon mould was clean and dry at time of pouring. I poured the wax in slowly at 60 degrees Celsius. The front of the wax melts are cracked and don't have a smooth finish at all. I've done lots of melts with this mould absolutely fine. I don't know where I'm going wrong 😔 Quote Link to comment Share on other sites More sharing options...
NightLight Posted February 15, 2020 Share Posted February 15, 2020 What type of soy wax? Not all waxes are suitable for poppin out of molds and will stick. Quote Link to comment Share on other sites More sharing options...
kandlekrazy Posted February 15, 2020 Share Posted February 15, 2020 I've had trouble with a few. If you pop them in the freezer for 5 mins before unmolding they should come out clean. Sometimes there is a residue in the mold itself so be sure to wash them thoroughly when new with hot water and Dawn detergent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.