lwaltmann Posted September 19, 2007 Share Posted September 19, 2007 I need help. Tried everything from glue dots to glue gun (yuck messy), but the wax is to hot and the wick tab goes loose. Also, what is the best way to get your wick straight? Thanks for any suggestions. Quote Link to comment Share on other sites More sharing options...
anabanana's candles Posted September 20, 2007 Share Posted September 20, 2007 I have this problem too. Someone please offer help. Quote Link to comment Share on other sites More sharing options...
grama Posted September 20, 2007 Share Posted September 20, 2007 I use the heat gun with high temp glue - be sure it is high temp - and have no problem with wicks coming loose. To get wicks straight - guess this is what you are talking about. I make a template of my jar - just put it on a piece of paper and draw around the jar bottom, then take jar off and measure where you want your wicks to go. Draw a little circle for the wick or wicks. When you put the jar on top of template then you know where to put your wicks. hth Quote Link to comment Share on other sites More sharing options...
lwaltmann Posted September 20, 2007 Author Share Posted September 20, 2007 Thank you very much. That sounds excellent. Will try both. Quote Link to comment Share on other sites More sharing options...
Jami Posted September 20, 2007 Share Posted September 20, 2007 For palm, I also use high temp glue sticks. BUT, I try to put my wicks in at least a couple hours ahead of time. I know the glue sets up quicker than that. I just prefer to give it the extra "set" time.To center the wick, I use wick centering tools. I pull the wick up tight and use a clothespin to hold it secure. You can also use a binder clip. I get mine at Hobby Lobby. Here is a link for them:http://tinyurl.com/3aktq6 Quote Link to comment Share on other sites More sharing options...
Judy, USMC Posted September 21, 2007 Share Posted September 21, 2007 I start setting my wicks at least 8 hours before pouring. Glue guns are sometimes cumbersome for me - and I hate those little strings. Guess I need to practice my method more. However, I have found that using GE silicone caulk has worked wonderfully for me. You need to read the back and be sure to get the one that says NOT FOR: "Surfaces that will exceed 400 degrees."There has been some controversy about using this stuff. I, personally, set the wicks while sitting outdoors and do not believe the brief exposure is enough to do damage. I keep them on the porch for a couple of hours and then bring them in and start pouring the next day! Never had a wick slip yet!PM if you have any questions. Quote Link to comment Share on other sites More sharing options...
kandlekrazy Posted September 21, 2007 Share Posted September 21, 2007 Since I started using the wick stickers from Candlemaker's Store, I haven't had a wick pop up in anything...soy, palm or blends. Not even in tins and that was my biggest problem before. I heat my containers (which seems to help with the adhesion process), wick and pour. Quote Link to comment Share on other sites More sharing options...
chiptooth Posted September 21, 2007 Share Posted September 21, 2007 I also use the GE silicone and it works great. Not one wick has loosened yet. Quote Link to comment Share on other sites More sharing options...
becky0404 Posted September 21, 2007 Share Posted September 21, 2007 I use the wick stickums from BCN with no problem at all in my palm. I've never had a wick slip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.