dsipp138

OOB thier FO's smell pretty strong. I've tested the 3 below all with good results in 4627. Cool Citrus Basil Midnight Pomegranate Apple Jack & Peel I've tested the following in Ecosoya PB mix with C1 (For Tarts) with great results. Passionate Kisses Pina Colada Monkey Farts

I'm located in IL. South East of Chicago or NW Indiana. I not even sure what to do a search for on google. I've tried several things but mostly pull up auto glass or plastic bottle companies. I'm sure i'm not searching for the correct things. When I search for the libbey number I don't get local results.

I'm looking for a good supplier of Status jars. I know the jar store has them but i'm hoping for a mid west supplier. Any help would be great.

What wax do you find works best with fruity scents?

I do agree, and I should have tested them first before sending them out. I knew someone was going to spank me for that. LOL I was just trying to get some prospective on what a customer would think. I've made over 50 testers and so far only 3 stand out. I'm going to be changing some things and doing some more testing. Burning a tester I made last night.

Thanks debbie... I'm using a 8oz status.

I've been doing a lot of reading and testing these last 6 months and finally put out some testers to family to get feedback. I made some jars, tarts, votive, smelly Jellies, & Pillars. I need advice on everything of course but I’ll start with the jars first. I sent a survey and I asked if they were strong, fair, faint, none. All came back in the fair to faint. Everyone that came back also said I needed to add more fragrance to the candles. To them it seems that I didn't add enough but I’m sure it must be something with the wick or my process. Maybe too much FO is burning off because I’m adding the FO in the wax at 195 and mixing with a stick blender and pouring at 180, or maybe the wick is too hot and burning it off. My tarts did very well with the FO's in EcoSoya PB so I doubt its bad FO's that are causing the problem. (Although i'll take advice on that as well.) I did not test these before sending them out because I only have sample size FO's. In most of my other candles I have made them with the Eco's because was recommended by CS wick guide. I am getting more soot buildup on the jar than I would like though. I noticed most people here suggests the HTP wicks with the wax so i'm going to try that direction as well. I do appreciate your responses. Wax: 4627 Jar: 2.6" Diameter FO load: 10% Poured: 180 Degrees Wick: Eco-6 ---FO List--- Candle Makers Store - Black raspberry Vanilla Wellington - Coco-Mango Cajun - Mulberry Madness BC - Hawaiian Paradise BC - Sex on the Beach CandleWic - Strawberry & Champagne

Sliver and Candybee, I wanted to tell you thanks for all the help you've given me these past months. I've been doing a lot of reading and testing and finally put out some testers to family to get feedback. I made some jars, tarts, votives, smelly Jellies, & Pillars. I want your advise on everything of course but I’ll start with the jars first. I hope you don't mind. I sent a survey and I asked if they were strong, fair, faint, none. All came back in the fair to faint. Everyone that came back also said I needed to add more fragrance to the candles. To them it seems that I didn't add enough but I’m sure it must be something with the wick or my process. Maybe too much FO is burning off because I’m adding the FO in the wax at 195 and mixing with a stick blender, or maybe the wick is too hot and burning it off, or maybe the FO's suck. I did not test these before sending them out because I only have sample size FO's. In most of my other candles I have made them with the Eco's because was recommended by CS wick guide. I am getting more soot buildup on the jar than I would like though. I noticed everyone suggestion about the HTP wicks. Please suggest a size because I will order some more. Your help is appreciated. Wax: 4627 Jar: 2.6" Diameter FO load: 10% Poured: 180 Degrees Wick: Eco-6 ---FO List--- Candle Makers Store - Blackraspberry Vanilla Wellington - Coco-Mango Cajun - Mulberry Madness BC - Hawaiian Paradise BC - Sex on the Beach CandleWic - Strawberry & Champagne

It takes color pretty good. Its a little pastel IMO. I mix it with with a lower MP wax at a ratio of 70 / 30. 70% PB and 30% being what ever i have the most of at the time... (464, C-1... etc.) Cracking: I'm assuming you mean in the 6 or 8 cube tart mold. If you fill it up to the top, I haven't had a problem with cracking. However if you skimp a bit and only fill just past the dividers, it will crack when you try to close the lid. If you plan to use PB by itself, its pretty hard, with a good CT. If your making anything over an 1" thick with straight PB you won't have an issue with cracking. So why do I mix it if it does OK alone. I think its just too hard for my taste, so i mix it.

How did the others turn out. I noticed you stated that they are not worth the price. Who has a better product in your opinion with price not being a factor.

Not to hijack the thread, but what blend do you use?

Lauran, Thank you for your response. You are correct, I only make candles right now. The reason I asked is because I believe most FO suppliers dilute the FO some. Some places you can get Ultra concentrated, or a higher grade of FO from the stardard. This lead me to believe that they must be diluting it a bit. I read that DPG can be used as a carrier oil but i thought that was what you put in the reed diffusers. Where can I purchase the FCO.

Rach, I've been wanting to do this along with my candles. Do you just bottle the FO or is there an additive i should be adding to it? So funny, my husband and I were just talking about this last night.

What might make you have poor hot throw and a full melt pool? Is there an "approximate" area a certain diameter should fill? (i.e. 2.5" D - 150sqft fill; 3" D - 300sqft fill; 3.5" D 400sqft) Should there be a certain amount of time when we should expect to begin to measure the strength of throw from our candles. (i.e.. 3" diam after the 4th hour, or after the 2nd burn cycle, or immediately.)

I have not. I wanted to know would it even make a difference if I did. Do LX wicks typically give better throw than ECO's?

Is it possible to get better HT from a different wick? I'm not getting the throw I looking for but have a great burn and edge to edge pool after 2 hrs. 10% FO load using libbey 11oz tumblers using 2 HTP 52's with the igi4627 comfort blend wax. Thanks for your help.

Burned another tester today and I wasn't pleased with the throw. I could smell it just a little after i got out the shower. It had been burning for about an hour. No noticable difference after the 4hr burn mark. I know i need to wick up because I didn't get a full melt pool. Burn pool was 2.5" after 4hrs. My mom came over right after i put it out and she didn't mention the smell or the candle. Apple Jack n Peel from Lonestar - Double HTP83 Wicks - 3.5" Square Container - Cranberry Dye Chip - 12oz wax - 12% FO load. Curred 2 days. How much of an impact will that have on throw? What are your suggestions for testing and measuring for FO throw? I'm looking to make a candle that has the FO throw strong like AirFreshner, or Axe (Spray Deoderant). My glade plugin (the oil kind) smells stronger. Thanks for your help.

What size labels did you use. They look great btw.

I just got a order in from CS and Peak. I haven't ordered from NG just yet. I was told they have very good FO's

I have almost 10lbs of C-3. If your interested i'd sell it to you.

Thanks for the info. I've seen Tennessee before but never went to the website to look around because of shipping. I'm actually taking a trip there shortly so it may be worth a look.

Yes, Anytime. I'm actually in South Holland (45min east), so that would be great. I'm looking for a good container place at the moment. I don't think all the features are active on my account. I just started about 4 weeks ago. Started in Soy and quickly found that I can't acheive as much HT with it. I'm not having much luck with the IGI4627 either.

Could you message me some of the FO suppliers and Container Suppliers you use. I have wasted a ton on LoneStar FO's. I was begining to think they weren't very good from another thread i read. (That thread was an old thread back in 2006. Guess things haven't changed much.)