Jump to content

NightLight

Registered Users Plus
  • Posts

    1,357
  • Joined

  • Last visited

  • Days Won

    49

Posts posted by NightLight

  1. Baking soda for wood burning stoves can clean the glass and the stove. I always use it to clean the glass, it’s pretty amazing.

    I also use it at the end of burn and add a tablespoon to embers at end of burn.

    If you struggle with clean glass on your woodstove you will be amazing with the cleaning power of baking soda.

  2. You should get yourself a digital infrared thermometer. You can get them cheap everywhere. If you want to make good anything waxy it’s 8mportant to know the exact temp. Many waxes need to be poured at a temp plus or mins a couple degrees to pour just right. If you melted your wax and then just poured into clamshell without know the temp that’s goi g to be an issue for you for multiple reasons. Too hot, sinkholes in wax, too low possible graininess, too hot melt your plastic clamshell etc.

     

    you want something like this…

    https://www.homedepot.com/p/ProHT-Digital-No-Touch-Infrared-Thermometer-05145/314213680

    • Like 1
  3. That looks like you poured them too hot and got sink holes. pour at the lowest temp you can and see how they do.

    If that fails change wax, or modify that wax with another wax. Or you can try and heat gun the top to smooth out.

    • Like 1
  4. Add anything and wax can change dramatically with burn. Adding more fragrance without adding an additive to harden it, will make the wax softer. There is a difference in burn between a lower percentage and higher percentage. Just as if you added 1 per cent beeswax versus 10 per cent beeswax. So every change makes different outcome. Even small changes can yield differences in wax appearance, burn and adhesion.

×
×
  • Create New...