Jeana Posted July 23, 2009 Share Posted July 23, 2009 I've been working with some Libbey claret glasses. Those of you who make these, how do you fastened the wick tab to these? There is a deep dip at the bottom of the glass, where the wick tab is to be fastened so it isn't level. Quote Link to comment Share on other sites More sharing options...
blt212 Posted July 23, 2009 Share Posted July 23, 2009 Hi Jeana...I use a little hot glue in that dip area of the wine glass and then stick the wick tab directly to it....has worked out well for me.HTHBrenda Quote Link to comment Share on other sites More sharing options...
Jeana Posted July 23, 2009 Author Share Posted July 23, 2009 That's what I was thinking, but it seems like it would be much more glue than I normally use to fill in the dip. Do you use the same wine glass? I see other ones I like better but they have shapes that may be harder to wick. These are almost straight up and down. Quote Link to comment Share on other sites More sharing options...
blt212 Posted July 23, 2009 Share Posted July 23, 2009 No I didn't use those exact glasses but mine were pretty much straight as well just over 3" in dia. I don't sell them but just make for friends and myself. It didn't seem like the dip took much glue and because the glass and stem comes together there it wasn't really noticeable... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.