fredron Posted January 11, 2007 Share Posted January 11, 2007 I've been doing some testing with 6006, and so far so good, but I have a problem. We use square jars in 3 sizes. The 6006 has been fine in the larger 2, but I'm getting sink holes in the 8 oz jar that holds 5 oz of wax. Usually, I'm working with 4# of wax, and I get (4) 16 oz and (4) 8 oz candles. I'm pouring into warm jars with a wax temp of about 165 degrees-that is, I pour the larger jars first at 165, then work down to the smaller. The temp has probably dropped some by that time, but I don't measure constantly, so I don't know the exact temp. I'm guessing between 160 & 165. Usually there are 2 or 3 that develop the holes.I don't want to have to heat gun every small candle I make, so does anyone have any ideas as to what's going on?I like the wax, but don't like the problem.Fredron Quote Link to comment Share on other sites More sharing options...
jillgunter Posted January 11, 2007 Share Posted January 11, 2007 Hmm I pour the 8 oz tins with about 5 oz of wax. I get nice flat tops. I pour at 160. Maybe they are cooling to fast. I like to stick mine in my cool oven to keep drafts and all away.Edited to add, maybe you are getting air bubbles? Try pouring slower and tapping them good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.