lovebug7480 Posted September 16, 2005 Share Posted September 16, 2005 I came across an article saying that you can add 1/2 tsp of salt to your water before adding the lye and this apparently makes for a harder bar. It says that it doesn't make an overall harder bar but it will harden the bar up more quickly and be more hard right after unmolding rather than if you didnt' have the salt in there. Anyone heard of this or try it out? I have seen many speak of adding in sugar to increase lather. Can you do both salt and sugar in the same recipe? Or would one counteract the other? Thanks for any advice you can give. Quote Link to comment Share on other sites More sharing options...
Lorrie Posted September 17, 2005 Share Posted September 17, 2005 This is a very good ? and I would love to hear the answer because I have heard of the sugar and salt thing but have not tried it! Quote Link to comment Share on other sites More sharing options...
SheilaW Posted September 17, 2005 Share Posted September 17, 2005 I used a recipe off of "To Die For" suppliers site and it called for a 1/2 Tbls. of salt and 1 Tbls. of sugar per 64 oz of oils. You dissolve it in the water before adding lye. It turned out well so I add it to every batch now. Quote Link to comment Share on other sites More sharing options...
ChrisR Posted September 17, 2005 Share Posted September 17, 2005 I also add 1/2 TBS salt and 1 TBS sugar per lb. to every batch of my GM soap. I do dissolve it in about an oz. of water before I add it to my lye solution. Since I don't use coconut oil, it does help with the hardness and lather of the finished bar. Quote Link to comment Share on other sites More sharing options...
Meridith Posted September 17, 2005 Share Posted September 17, 2005 I also add 1/2 TBS salt and 1 TBS sugar per lb. to every batch of my GM soap. I do dissolve it in about an oz. of water before I add it to my lye solution. Since I don't use coconut oil, it does help with the hardness and lather of the finished bar.If you don't use coconut oil, do you use lard to get a good lather? If not, besides the salt and sugar, what do you use for lather? I'm still kinda new at this so I am still learning. TIA Quote Link to comment Share on other sites More sharing options...
Rebecca_IA Posted September 18, 2005 Share Posted September 18, 2005 The oils that create more bubbles are coconut, palm kernal oil and babassu. Usually, you will see one or more of these (with coconut and PKO being more popular) being used in recipes. With that said, you can make soap without any of them and still have bubbles, but different than if you used one of those oils.Here are links to oils and their properties. Each one essentially gives you the same information, but in different ways (we all learn/absorb info differently). http://www.millersoap.com/oilproperties.htmhttp://www.naturesapprentice.com/oilchart.htmThere are other additives you can add that will effect your lather aside from the oils and the sugar. Coconut milk, clays, etc. Many additives to experiement with. Quote Link to comment Share on other sites More sharing options...
ChrisR Posted September 18, 2005 Share Posted September 18, 2005 I use palm kernel at right around 15%....100% fresh goat's milk for my liquid and various other oils, dead sea salt and raw sugar. No lard or tallow, I personally didn't like it!! Quote Link to comment Share on other sites More sharing options...
siberia Posted September 18, 2005 Share Posted September 18, 2005 I also add 1/2 TBS salt and 1 TBS sugar per lb. to every batch of my GM soap. I do dissolve it in about an oz. of water before I add it to my lye solution. Since I don't use coconut oil, it does help with the hardness and lather of the finished bar.I do the same as well. In my test batches I have noticed a difference. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.