kdmorgan Posted December 12, 2006 Share Posted December 12, 2006 I have been testing my wicks by poking holes in the candle with a skewer, inserting the wick and heat gun the top. With every wick I put in, for the first 10 minutes, they have very tall flames and soot. After 10mins they either calm down and burn nicely or drown out.Am I doing something wrong or is this happening because the wick needs to absorb the wax before I can judge the burn.(Right now I am testing 16oz apothacary jars with J223 and 6% creme brulee FO)Thanks for the help,Kim Quote Link to comment Share on other sites More sharing options...
Wildheart75 Posted December 12, 2006 Share Posted December 12, 2006 Do you trim the wick before you light it? I have that problem if my wick is too long when I first light it. That's the only thing I can think of, I'm sure someone else will come along with more help. Quote Link to comment Share on other sites More sharing options...
topofmurrayhill Posted December 12, 2006 Share Posted December 12, 2006 What are some examples of the wick types and sizes this happens with? One possibility is that they're too large.Another possibility is that the wicks aren't trimmed to 1/4 inch before you light them.Finally, it can happen if FO separates from the wax and goes up the wick. You get a tall smokey flame, then the wick clogs and dies down. Typically you'll get mushrooming as well.If that's the case, you should make sure the FO is incorporated well. Creme Brulee can be stubborn if the wax and the bottom of the pour pot aren't hot enough. Usually it has poor wax compatibility but strong throw, so sometimes you're better off cutting back on it. Quote Link to comment Share on other sites More sharing options...
jillgunter Posted December 13, 2006 Share Posted December 13, 2006 Hmm, maybe try zapping it with a heat gun after you insert your wick is all I could think. Most people do exactly what you do. Quote Link to comment Share on other sites More sharing options...
kdmorgan Posted December 13, 2006 Author Share Posted December 13, 2006 Thanks for the responses, I really appreciate it. I do trim the wicks to 1/4". I have a skewer i've marked on the flat end and I hold it next to the wick before I trim to make sure it's the right length.I'll list below the wicks i've tried...(2) CD-12(2) CD-10(2) CD-8(2) CD-6(2) CD-5(2) Performa 85(2) performa 90(2) Performa (100)(2) LX 8(2) LX 14(2) LX 16(2) LX 18(2) hemp 838(1) hemp 1200(2) 44-32-18z(2) HTP 52(2) HTP 83All of these light the same. Big flames that calm down.The HTP & the LX all drown sooner or later.Also, the flames always look like they are in a little wind storm. They don't flare up after the flame has calmed down but the look like they are being blown around (I hope that makes scense). I thought I just had a drafty old house but I lit a hand-poured candle I bought last year and it is burning steady.I thought I had incorporated the FO well. I added at 190 and stirred until it had cooled to 145 (my arm was tired). I didn't see anything at the bottom of the pot after I poured either.I really appreciate any advise you can give me. I'm just not sure what is happening. Quote Link to comment Share on other sites More sharing options...
Bill Posted December 13, 2006 Share Posted December 13, 2006 I am having similar problems in my testing also. I think I am about to pour a non fragrant, non colored candle just to see if the burn changes. If it burns well then I know it's a problem with the FO or dye. I'll keep an eye on this thread for any good advice, but I think it's just a matter of patience. It looks like you have tried a lot of wicks kd, I hope you find the right one soon! Quote Link to comment Share on other sites More sharing options...
kdmorgan Posted December 13, 2006 Author Share Posted December 13, 2006 Thanks Bill and good luck to you too! :highfive: I am pulling my hair out right now and should be bald by Christmassanta eek . Keep us posted on your results. Quote Link to comment Share on other sites More sharing options...
Bill Posted December 13, 2006 Share Posted December 13, 2006 Thanks Bill and good luck to you too! :highfive: I am pulling my hair out right now and should be bald by Christmassanta eek . Keep us posted on your results.LMAO, that's why I shave my head, so I don't have to pull any out! Quote Link to comment Share on other sites More sharing options...
kdmorgan Posted December 13, 2006 Author Share Posted December 13, 2006 :laugh2: Was your picture there when you first posted..I didn't even see it. Well I guess we'll be twins by Christmas Quote Link to comment Share on other sites More sharing options...
topofmurrayhill Posted December 13, 2006 Share Posted December 13, 2006 My gut says the prime suspect is the fragrance oil, so I think I'd start by making one with half the FO to test that possibility.If the wax isn't holding the fragrance well it can cause flare-up, soot and wick clogging. The FO could even be getting concentrated towards the wick as the candle cools.If that turns out to be the explanation and the throw isn't good at 3%, you can try splitting the difference and see how it works at 4.5%. That can often give you a very nice throw with this scent. Quote Link to comment Share on other sites More sharing options...
kdmorgan Posted December 13, 2006 Author Share Posted December 13, 2006 Thanks Top - I will pour the next one with 1/2 the FO. Do you have any suggestions for incorporating the FO better. I lean towards vanilla scents so I guess I will have this problem alot.Thanks again,Kim Quote Link to comment Share on other sites More sharing options...
The_Dallas_Texas_Dean Posted December 13, 2006 Share Posted December 13, 2006 I think it is always a good idea when you start testing new wicks (or a new wax )to always start with no fragrance or dye. It gives you a clear picture and understanding as a starting point. I think it would have saved me a lot of time, energy, money and frustration had I know this from the beginning. Quote Link to comment Share on other sites More sharing options...
kdmorgan Posted December 13, 2006 Author Share Posted December 13, 2006 It is definately a good idea. I'll pour one tomarrow night and see what happens. Quote Link to comment Share on other sites More sharing options...
topofmurrayhill Posted December 13, 2006 Share Posted December 13, 2006 Thanks Top - I will pour the next one with 1/2 the FO. Do you have any suggestions for incorporating the FO better. I lean towards vanilla scents so I guess I will have this problem alot.Thanks again,KimYou may already be doing fine with the incorporating. It's just that most of those vanilla types have poor wax compatibility, so the maximum you can use is often less than with many other scents. It depends on the exact FO and what wax it's going into.I don't know if it makes a difference in the candle itself, but you might find it mixes with less effort if you warm it a bit and/or if the mixing pot isn't sitting on a cool surface when you add it.Let us know what happens. Quote Link to comment Share on other sites More sharing options...
Patience Posted December 13, 2006 Share Posted December 13, 2006 I'm wondering if poking a hole to place the wick is creating air pockets below the surface. That will cause a flare up. What do you think? Quote Link to comment Share on other sites More sharing options...
kdmorgan Posted December 18, 2006 Author Share Posted December 18, 2006 Top...You're awesome! The flare up is GONE and I just wanted to say thank you so much for the help . I would give you my first born but she's 16 now and a real pain in the @$$ .Thanks again,Kim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.