MissMargie Posted April 25, 2006 Share Posted April 25, 2006 A new customer purchased a candle from me. It was Mac Apple in an 8 ounce dodec jar. The wax used was EcoSoya 135 and the wick was an HTP 104 and I used medium red liquid dye. She claims that the jar was burning less than 2 hours when her smoke detector went off. When she checked the candle, she found it had broken; almost a perfect horizontal break all the way around the jar and the label had started to burn.I'm soooooo upset by this since I sell an awful lot of these. I tested the best possible wick for this line and I can't think of what might have caused it.I won't risk my customers safety or our reputation.I've wondered if maybe the jar was a defect or maybe she burned it longer than she estimated.I'm very concerned. Have any of you ever experienced anything like this?My mother-in-law (in spite of my constant warning to her) burns these candles for hours and never had one break.Any feedback would be so very appreciated. I'm really worried. Quote Link to comment Share on other sites More sharing options...
KFTS Posted April 25, 2006 Share Posted April 25, 2006 I've had once incidence where a jar broke, but it was a tester jar with an unsecured wick and the wick had tilted to the side and overheated the glass. Was her wick off center? If it was brand new probably not, but if she had burned it several times and maybe it wandered and she didn't center it? Quote Link to comment Share on other sites More sharing options...
iammommytwo Posted April 25, 2006 Share Posted April 25, 2006 oh my ....all I can say, is that I have never had one break. I power burn all my personal candles . Even had one w/a wick that off centered and the label started to turn brown, but the jar never broke.IMO, sounds like a defective jar. Quote Link to comment Share on other sites More sharing options...
shafferbuns Posted April 25, 2006 Share Posted April 25, 2006 My sister bought a candle from a lady last year, and the jar broke on her like that. My sis is a very good candle burner too, always makes sure the wick is trimmed and never really power burns them. Probably the jar. Quote Link to comment Share on other sites More sharing options...
magsglass Posted April 25, 2006 Share Posted April 25, 2006 MissMargie,IMHO, it sounds like a thermal crack, which was likely caused by inadequate annealing of the glass during its manufacturing. I'm glad the customer caught it before it became a disaster. Too bad she didn't heed the common advice to never leave a candle unsupervised. Quote Link to comment Share on other sites More sharing options...
Rus Posted April 26, 2006 Share Posted April 26, 2006 We go through thousands of glass jars each year and despite getting them made in USA - we still find several jars w/ hairline fractures. These are a disaster waiting to happen! We try hard to inspect all jars, but some cracks are not very visible to the eye. I would question a crack first since you were using soy wax and a cooler burning wick.It you use jars that aren't seamless, we've found this to be a larger problem glass type.Rus Quote Link to comment Share on other sites More sharing options...
Marilyn Posted April 26, 2006 Share Posted April 26, 2006 That is why I tell my customers not to assume that a jar won't break, and to use caution where they are setting the jar and don't leave unattended. But of course some people ignore warnings. Quote Link to comment Share on other sites More sharing options...
MissMargie Posted April 26, 2006 Author Share Posted April 26, 2006 Thanks so much for all the feedback. You've pretty much echoed my rationale but I really needed to "hear" it from other candle makers. The thought that a candle I made could be a hazard was enough to lose a year's worth of sleep.I'm just gonna have to stress more of the cautions and instructions. Gee... should I buy liability insurance? Sigh.... Quote Link to comment Share on other sites More sharing options...
Beth-VT Posted April 26, 2006 Share Posted April 26, 2006 If you are selling a product.....you should already have insurance Quote Link to comment Share on other sites More sharing options...
ChrisR Posted April 27, 2006 Share Posted April 27, 2006 I had insurance in place BEFORE I gave any candles to even my testers!! Quote Link to comment Share on other sites More sharing options...
Gretchen Posted April 29, 2006 Share Posted April 29, 2006 From what I can tell, jars with the seams are generally thicker glass; which is a safer senario, thick or thin, or is that not even part of the equation?Gretchen Quote Link to comment Share on other sites More sharing options...
Meridith Posted April 29, 2006 Share Posted April 29, 2006 Did the wick move and maybe get too close to the side of the jar? I've had that happen a few times that my wick didn't stay in place despite the fact that I use wick stickers. My wick slid over next to the side of the jar and caused it to get really hot but the jar didn't break. Just a thought.BTW - I'm jeoulous that you can get MacApple to throw. I can't get that one to throw to save my life. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.