JudyN Posted March 22, 2006 Share Posted March 22, 2006 I'm trying to wick a small square taper container with an opening of 3" x 3". I'm using Comfort Blend. I first tried 51-32-18 z and didn't get a complete melt pool so I wicked up to 60-44-18 z and it was a little better but still not a complete melt pool. Should I try another zinc or is there another wick that you can recommend? TIA Quote Link to comment Share on other sites More sharing options...
AngelaVA Posted March 23, 2006 Share Posted March 23, 2006 If the 60 didn't clean up the sides, even towards the end of the burn, you could always try a 62 zinc. You could also try double-wicking with two 44z and see if that makes a better burn for you. HTP wicks work pretty well in this wax to, so if you have some around, you may want to give those a try. Not sure about what size to recommend though. HTH Quote Link to comment Share on other sites More sharing options...
Crafty1_AJ Posted March 23, 2006 Share Posted March 23, 2006 Ditto -- if you were pretty close with the 60z, just bump up to a 62z! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.