JanetsCandles Posted June 24, 2012 Share Posted June 24, 2012 I'm working with a big slab mold with dividers that you put in while the soap is still wet. The bars are set on the top, but taking the liner (plastic) off is showing me that it's still quite damp lower in the bar. Is this normal, or did I somehow screw up? And if I didn't screw up, is there an easier way to get the liner off where I don't pull the soaps into weird shapes? Quote Link to comment Share on other sites More sharing options...
lsg Posted June 24, 2012 Share Posted June 24, 2012 Have you tried putting your batch in the freezer for an hour or so before pulling off the liner? I don't know if that will work, just an idea. Quote Link to comment Share on other sites More sharing options...
JanetsCandles Posted June 24, 2012 Author Share Posted June 24, 2012 No, didn't think of it. Wouldn't have had room either it looks like. But I finally got the stuff off. Screwdrivers to help pry up the dividers and my straight cutter to pry the bars off. Quote Link to comment Share on other sites More sharing options...
Kitn Posted June 25, 2012 Share Posted June 25, 2012 It could be that your recipe just needs a little bit longer in the mold. I have that problem with one recipe, I let it sit for a day or two or three.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.