roma92 Posted December 6, 2005 Share Posted December 6, 2005 I have a brass plate with a design etched onto it that is 9 inches in diameter. I use this to transfer the design onto the wax. As for a mold container I have been using a cake pan which I think is 10 inch or 10.5. Either way, once I pop out the wax I am then left having to carve the excess wax which is more work than I want to do. Can anyone direct me to instruction on how I can make a mold container (out of silicon or whatever) that will be the perfect size so basically all I need to do it pop out the wax, remove the plate and be left with a finished product? All help and suggestions would be greatly appreciated and thank you in advance. Quote Link to comment Share on other sites More sharing options...
roma92 Posted December 7, 2005 Author Share Posted December 7, 2005 no one has made custom molds before? Quote Link to comment Share on other sites More sharing options...
Candle Man Posted December 7, 2005 Share Posted December 7, 2005 There is some great info here http://www.smooth-on.com/ Quote Link to comment Share on other sites More sharing options...
roma92 Posted December 7, 2005 Author Share Posted December 7, 2005 Found the perfect solution, check this out, most I am sure have seen this before anywayhttp://www.pourette.com/dept.asp?d_id=12073&l1=6911&l2=12073 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.