chauntelle Posted September 21, 2007 Share Posted September 21, 2007 Okay so i dont wanna sound stupid but as ive never used these was wondering how you use them and what they look like.I've always wicked the mould but i have some pillar moulds that have a small hole but not big enough to fit a wick through so i thought that this might be the answer??Searched the threads but still havent found the answer. If there is a thread that ive missed please could you point me in the right direction.TIA Chauntelle Quote Link to comment Share on other sites More sharing options...
Scented Posted September 21, 2007 Share Posted September 21, 2007 http://www.peakcandle.com/products/Pillar-Wick-Pin--3x4__A1027.aspxShows a wick pin threaded through a mold. Basically you put a little bit of mold seal on the pin base to hold it in place. If you have a mold that a wick won't fit through, you may not get a wick pin through it either. Sure can't tell you where I bought my first wick pins (off eBay no doubt). They were slender and thinner than the pins I have now, but all 10 broke easily from their base. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.