chrisasst Posted April 10, 2007 Share Posted April 10, 2007 after reasearching the boards, I am still confused about wick pins. if you use them how do you insert the wick in the candle (ie: votive) after the candle has hardend. Quote Link to comment Share on other sites More sharing options...
number2of7 Posted April 10, 2007 Share Posted April 10, 2007 Found this....hope it helps....http://www.candletech.com/cgi-local/...m=1102 891768 Quote Link to comment Share on other sites More sharing options...
birdieluvr76 Posted April 10, 2007 Share Posted April 10, 2007 Once you pop the pin out, you push it through the hole on the bottom. Quote Link to comment Share on other sites More sharing options...
Candlebuddy Posted April 10, 2007 Share Posted April 10, 2007 It's as easy as 1-2-3 1. Take the votive out of the mold (if you have a problem getting the votive out, put in freezer for a couple of minutes, it should pop right out); 2. Gently pull the wick pin out of the votive; 3. Thread the wick through the votive. Quote Link to comment Share on other sites More sharing options...
chrisasst Posted April 10, 2007 Author Share Posted April 10, 2007 well ok, it is that easy..thought I was missing something..thanks. Quote Link to comment Share on other sites More sharing options...
SatinDucky Posted April 11, 2007 Share Posted April 11, 2007 Inserting the wick after you've crimped the tab on the bottom of the wick ... Quote Link to comment Share on other sites More sharing options...
Candlebuddy Posted April 11, 2007 Share Posted April 11, 2007 Sorry, I should have specified that you thread a "tabbed wick" ... or yes, you could tab your own. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.