Jump to content

Square Palm Pillars

Recommended Posts

Hi all. I searched for the answer to this question and found only an answer with regard to paraffin. So, here goes. I'm testing square palm pillars 3" and I'm having a tough time with the wicking. On some, after a 6-8 hour burn, it's leaving a 1" rim on the corners, and a 3/4" rim on the sides, using a CD12. My question is, on these square palm pillars - what do you expect from the melt pool? Should I just expect a 1/4" rim on the sides, and a larger rim by the corners, i.e. 1/2"? I mean, a 1" rim on the sides, with a 3/4" side rim seems too big for an eight hour burn . . . it's the same size as when I burned it for my initial three hour burn. Any suggestions would be much appreciated. Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...