candlecrazyinwv Posted February 25, 2007 Share Posted February 25, 2007 Need some suggestions on how everyone is keeping their wick centered in the Grubby Taper Mold and also bracing it down in the bottom of the mold. I have the one from FlexiMolds with two tapers that connect with 1 wick. Using 4625/4794 blend and 15 ply wick. Quote Link to comment Share on other sites More sharing options...
candlecrazyinwv Posted February 25, 2007 Author Share Posted February 25, 2007 Ok so the mold has a slit in it so I was able to run my spool of wick threw the mold and using clothes pins I kept the wicks strait. Now how do I finish the bottom of the taper...do I tie it in a knot and maybe dip the bottom of it into some hot wax? Any suggestions? Quote Link to comment Share on other sites More sharing options...
Raggedy Dani Posted February 25, 2007 Share Posted February 25, 2007 I tried that mold from flexible, I was bummed on how to have it single wicked hanging tapers but no matter how hard i tried, it just didn't work.so i had to do wick on each side and tie a knot and finished it off with homespun bow where the wick were tied together and put a primitive hang tag to make it look cool! lol oh and I also done it with an old vintage rusty key and hang tag that says Primitive Blessings. etc.HTHDani Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.