Jenna Posted February 7, 2006 Share Posted February 7, 2006 I'm playing with strawberries and pie shapes and every time I take them out of the mold there are little bubbles. I have tried warming the molds and pouring at higher temps (190 or so). Are there other tricks? Maybe they're cooling too fast? Quote Link to comment Share on other sites More sharing options...
Dustpuuppy Posted February 7, 2006 Share Posted February 7, 2006 Tap the molds a bit, just after pouring, to dislodge the bubbles. Quote Link to comment Share on other sites More sharing options...
Jenna Posted February 7, 2006 Author Share Posted February 7, 2006 Thankyou Quote Link to comment Share on other sites More sharing options...
hollyberry Posted February 7, 2006 Share Posted February 7, 2006 Sometimes when i have thses I hit the finished product with a short blast from my heat gun... takes the bubbles and any "frost" away I didnt want. Quote Link to comment Share on other sites More sharing options...
Jenna Posted February 7, 2006 Author Share Posted February 7, 2006 still bubbles :embarasse Quote Link to comment Share on other sites More sharing options...
Dustpuuppy Posted February 8, 2006 Share Posted February 8, 2006 If theses look like pin holes, it may be from cooling too fast as you said in your OP. I've also gotten those, when I left a mold near a heat source and it got heated during cooling.If it's pin holes, you might actually be pouring too hot.Beyond that, I don't know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.