candlelover

I did check...all four of them, and I am using a Ryobi Laser Thermometer as well...they all read the same...190 in the fryer, but I figured because my pouring pot is not heated as it would be in a double boiler method, that it is cooling my wax too quickly. Soooo...any help in letting me know what method other people use would be greatly appreciated. I'm not looking to take a step back and revert to my old method, as my sales have increased to the point where I need to increase my output speed. Thanks to all again in advance for any ideas.

Hello. I just bought a Masterbilt turkey fryer for melting my wax. I have always used Presto pots, but was looking to have a bigger melter and can't afford the really expensive water jacketed type. My question is...I use a thermometer that I have in the hole of the lid of the fryer, and it reads 200 degrees. However, when I pour the wax into my pouring pot and use my laser thermometer, it reads 160 or so. It also starts to cool down right away, past the point when I can add my FO (usually 180). What methods do some of you use that will keep your wax hot enough to add your FO and dye? Hot plate came to mind, but would like to hear from those experienced. Thanks so much in advance.

Hello! Somewhat new to candle making (8 months), and have tested, tested, tested. This is strictly a hobby for me, but I would like to ask fellow candle makers out there a ? about wicking. I am currently using a soy mix of Eco-soya CB Advanced at 80% and Pure soy at 20% in a 16 ounce apothecary jar. I am also using 2 RRD 34 wicks....however, the flame seems to be very small, and little throw. Is this simply a case of wicking up to RRD37's or would you recommend another solution? Greatly appreciate any help from those more experienced than I. TIA