Buttercup Posted August 3, 2008 Share Posted August 3, 2008 I purchased popsicle molds to use for melt and pour soaps and the soap is stuck big time in the mold. I have put it in the freezer, let it set on the counter a bit and it still will not come out. For those of you that use those molds, what is the best way to get soap out of mold? Quote Link to comment Share on other sites More sharing options...
Guest jurnalynn Posted August 3, 2008 Share Posted August 3, 2008 i had this problem..........i use an olive oil spray in them and it stopped them from sticking they were very slippery when i took them out of the mold but after they sat for a whle thet was no longer an issueLaura Quote Link to comment Share on other sites More sharing options...
asheebeans Posted August 3, 2008 Share Posted August 3, 2008 I use silicone ones so my soapies just slide right out. If you have the $$, invest in some silicone molds. They are soooo worth it! :smiley2: Quote Link to comment Share on other sites More sharing options...
PixieWick Posted August 3, 2008 Share Posted August 3, 2008 i've never had a problem with silicone molds and M&P i use http://flexiblemolds.com for all my silicone needs .. ginger is FABULOUS Quote Link to comment Share on other sites More sharing options...
jbren Posted August 4, 2008 Share Posted August 4, 2008 I put mine in the freezer, then immediately into a pan/sink of hot water...they come out immediately with a slight tug. Quote Link to comment Share on other sites More sharing options...
Buttercup Posted August 4, 2008 Author Share Posted August 4, 2008 Thank you for all of your replies. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.