Hey guys, There's not as much feedback in the soy blend thread for this wax as one would think, nor enough thinking to the depth it's going to take to find out WHAT it is this wax wants... So I wanted to put some questions out there and get some feedback. How are you pouring it? Melting to what temp, putting oil in at what temp, pouring at what temp? How are you cooling it? What containers are you using? I've used this wax for several months now, and back during winter I had no problems with cracks. It turned out beautifully, and I was astonished, being a newbie at how well it turned out. The temperature inside the house was steady around 68º, 50% humidity or under, and I was cooling the candles sitting on wood cabinets. Regardless of how bad that COULD be, they came out perfect. I used no dyes. Now it is summerish, 72-75º in the house, and right around 63% humidity. I'm developing the horrid awful C3 crack. I noticed it right after I poured my first candle with dye actually, so I tried a couple more scents again with dye (Peak oils and dye) and it continued to happen. Took the wax out of the containers, re-melted it, put 1/2 TBSP of coconut oil per pound in, and if anything, it made things slightly smoother, but not as "matte" looking, more rough. I've poured high (160º), low (120º), tried with and without dye, and my only success is (back then) with no dye, cooler temperature, less humidity, and now no dye (still a SMALL crack, but less noticeable). What are your thoughts? I talked to my partner who is going to join in this endeavor with me, and she said she honestly preferred for a "green" marketed candle to be free of dye; that it coordinates in rooms better. Is it the dye that causes some chemical messup? I'm nearly ready to leave it out regardless. Aluminum and colors don't mix as well as cream does. Should I lower the humidity and temperature? Keep using coconut oil or no? Even just hearing what YOU do to make it work will help. My last resort is just to do re-pours on all of them. Still, shouldn't HAVE to for a supposed "one pour". I love this wax too much to switch, so I'm determined to conquer the criteria and find out what it IS. I'm optimistic.