Trouble wicking a 4 oz tin with pure soy wax

[tyru007]

Using ecosoya CB Pure with a very small smount of soy based dye and 1 oz/ lb FO into a 4 oz tin. Using ECO wicks No. 6 and No 8. Both the No. 6 and No 8 wicks give a good melt pool and scent throw but both wicks tends to drown out after a couple hours of use. The flame never goes out, but gets very dim. I typically need to pour off a little wax to keep it going. Sides of the container are somewhat clean with little tunneling on the side away from the curl of the wick. Obviously the No. 8 does a better job of cleaning the sides than the 6.

I would think the eco 10 would be a torch in this size candle.

Is there any better wicks to try in a pure soy wax? (I was thinking of tring the HTP wicks)

Thanks

[Sab]

The HTP wicks work well for me in the tins. I'm using a parasoy blend. Maybe try a 73? I use the 83 in the 8 oz tin.

[xsami3000x]

I'm using ecosoya 135 and have found a lx 16 or lx 18 works with the fos I've tried so far.

Sami

[dandelion garden]

I use Ecosoya CB Adv in 6 oz tins. I use mostly HTP 73s- some need a 83.

[Stella1952]

We used CDN wicks from JBN for our tins of Cargill C-3 and found that we could effectively use 10, 12 and 14.