Jump to content
Sign in to follow this  
TallTayl

Calculating Mold Volume

Recommended Posts

Someone asked for this to be posted as a sticky for future reference.

 

One of the most challenging tasks when making cold process soap is knowing how much you need to fill the mold. Typically CP makers use Oils as a base for the formulation.

 

For a typical mold, you only need to calculate the volume of the container and multiply by 0.4 for typical lye solutions.

 

Example: Log Mold Tall Skinny mold by Nurture.

Length: 11

Width 2.5

Depth of pour (desired bar height) 3.5

 

the volume of a recangular log is L x W x H (11 x 2.5 x 3.5) = 96.25

Multiply that total by 0.4 to find the weight of oils (in ounces) 96.25 * 0.4 = 38.5 oz of oils. THis is for "full water". Adjust the calculations up/down to approximate your solution needs to fill that mold. 

FOr instance, I use a 40% lye solution (much less water), so instead of 0.4, my calculation is 0.42 which results in a nice round 40 ounces of oils per log.

 

Example 2: PVC Pipe Mold (Cylinder) that is 3" across and 12" tall

The formula to find the volume of a cylinder is V=(pi)x(R^2)xH

Volume = pi x Radius squared x height. (the area of a circle times the height of the cylinder)

Volume = 3.14 x 1.5" radius (1/2 of diameter) squared x 12 inches high

Volume = 3.14 x 2.25 x 12

Volume = 84.78

Volume x 0.4 = amount of oils 

84.78 x 0.4 =  33.9 ounces of oil in that batch to fill the mold with typical water.

 

In my case with a 40% lye solution I'd need 84.78 * .42 or 35.6 ounces of oils.

 

This formula works for anything you can calculate the volume for.

 

Example 3: Slab mold  12 x 12 x 1' thick bars

12 x 12 x 1 = 144

144 x .4 = 57.6 ounces of oils

 

So volume times 0.4 for full water.

 

  • Like 1
  • Thanks 3

Share this post


Link to post
Share on other sites

Thanks for posting this TT! I still need to use the formula when I get a new mold or haven't used a mold in a long time and forgot the formula.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...