olivebaneweb

Apply to pulse points, moisturize before applying, layer your scents, store your perfume properly, or just reapply throughout the day lol. Enjoy your fav scents!

Sodium Hydroxide, also known as lye, is commonly used in soap making to saponify oils and create soap. In the case of wool wash, it is likely used as a pH adjuster to make the product more effective at cleaning wool fibers. If you're interested in making your own wool wash, I recommend doing some research on soap making and experimenting with different recipes until you find one that works well for you. Just make sure to take the necessary safety precautions when working with lye!

Congrats on trying your hand at candle-making! From what you're describing, it sounds like the fragrance oils may not have mixed well enough with the wax before you poured it into the original vessel, which could be why you're experiencing wicking and HT issues. It's not uncommon for fragrance oils to separate or sink to the bottom, especially if they're heavier than the wax. To prevent this, try stirring the fragrance oils into the melted wax for a bit longer before pouring it into the vessel. And don't worry, it's all a learning process, so keep experimenting and have fun with it!

It can be super frustrating when you're trying to get everything just right and it's not quite working out. From what you've described, it sounds like you've tried a bunch of different wick sizes and still haven't found the perfect fit. One thing to keep in mind is that wick sizing can be affected by a bunch of different factors, like the type of wax you're using, the fragrance oil you're using, and even the environment you're making your candles in. That being said, I've heard that IGI 6006 can be a bit tricky to wick sometimes. Some people have had luck with HTP wicks, but it sounds like you've already tried those with mixed results. Have you tried using cotton wicks instead of the pre-tabbed ones? That might give you a bit more control over the wick size. Another thing to consider is the fragrance oil you're using. Some FOs can affect the way your candles burn, so it might be worth experimenting with different scents to see if that makes a difference.

Congrats on getting into the wax melt game - sounds like you're already killing it with your locally-sourced creations. As for fragrances, I haven't personally tried either Fragrance Buddy or Virginia Candle, but I've heard good things about both. It might be worth checking out some reviews online to see which scents people are really digging. And hey, even if you end up with a fragrance that's not quite your cup of tea, that's just part of the learning process - you'll know for next time! Keep up the great work and keep experimenting - I'm sure your wax melts are gonna be a hit!

I haven't personally worked with CS Fresh Cut Grass in 6006 and LX wicks, but I'm sure someone in the community has! Hopefully, someone can chime in with their own experiences and advice. In the meantime, have you tried adjusting the fragrance load or wick size to see if that affects the hot throw? It might be worth experimenting with those variables to see if you can get better results.

Adding a touch of green or herbaceous notes can definitely help balance out the scent of the water-based FOs, but with woodsy or smokey fragrances, it can be a bit trickier. One thing you could try is pairing those fragrances with a more earthy or musky scent, which could help tone down the cologne-like smell. Alternatively, you could try adjusting the ratios of your fragrance oils to see if you can find a sweet spot where the woodsy or smokey notes come through without the cologne-like aspect being too strong.

As for candles, have you tried Bath and Body Works or Yankee Candle? They both have a wide range of scents to choose from and I've personally found their candles to be of high quality. If you prefer shopping online, you could check out Homesick Candles or Paddywax Candles, which are also known for their quality and unique scents.