candleshiba

I was wondering how it's possible that FOs are shipped in plastic containers yet eats through my plastic cups. I'm not too familiar with how plastic is graded so it's been an interesting learning experience! I too have used pipettes but haven't seen this sort of reaction, but it could also be that I haven't waited long enough. By solvents did you mean something like DiPropylene Glycol? And what do you mean by volatiles?

Could anyone explain why this happens? What chemicals in fragrance oils would cause this? When I first started marking candles I was measuring out my oils with stainless steel cups. After a while, I thought it would be much more efficient if I switch over to small plastic dixie cups, but I noticed that sometimes the fragrance oil eats through the cup. So I thought I could try a thicker cup, the classic red beer cups you find everywhere, but to my surprise, it also happened in these cups! It doesn't occur right away though, takes around 10 minutes or so after I pour out the FO for the remnants of the oil to melt the cup. Obviously I've switched over to using glass everything now, but I'm really curious what properties of FO causes this to happen. Also makes the case for everyone to be safe and use gloves!!

You're not the only one. The first roll I bought back in June? July? I forgot worked great. The last 2 rolls I bought from CS (1000 stickers) have been HORRIBLE. 50% of them unstick within 1 min of applying, and then another 20% of them unstick while I'm pouring the wax...I resorted to using a glue gun instead. They do have fantastic customer service though and I was able to get my money back.

@Candybee Thanks for the reply! Unfortunately, it was so long ago that I don't remember much of the details except for the "wow" moment when I used the soap! Curious from your experience though, what's the biggest difference between M&P vs CP soaps? I'd like to stick with M&P if I can help it since it seems much more "simple" than other methods! Would you have a recommendation for a good beginners base to start with?

Hi folks! I was wondering if anyone could shed light into why certain soaps clog the tub? A few years ago I was gifted a lavender handmade soap that was so wonderful that I tried to recreate it. I purchased some M&P base from bulk apothecary (honestly can't remember which one), and added some lavender into it. I think I let it cure for a week or 2, but I noticed that after using the soap, my tub was slowly getting more and more clogged. After that experience I sort of ran away from soap making. I'd like to pick it back up again and stick with M&P because I'm a total newbie, but was wondering if anyone could point me in the right direction? The amazing lavender soap that i was gifted had none of those clogging properties!

Ahah, I basically never trust reviews on websites except if you're buying off a 3rd party distributor (like amazon, but even they have issues). Reason being that the merchant can 100% control which reviews to surface on the website (I used to work for an ecommerce platform). Some suppliers though like CandleScience seem to have a more honest review system judging by the number of non-5 star reviews.

Most likely Adobe illustrator or photoshop, which is what professional graphic designers use. Steep learning curve so I wouldn't recommend it for everyone though

So I made a bunch of tea lights 2-3 weeks ago. Put them all in a box (some airtight, some not) and I've noticed that the tops of the majority of these tealights have an odd discoloration or crystallization...I'm not sure exactly what it is, but it's noticeably not smooth and looks a bit unsightly. A lot of them have this greyish-brown speckles. Does anyone have experience with this? Using 6006 wax. When I made tea lights previously with 464 I didn't seem to have the same problem - tops all remained silky smooth. Interestingly enough, the candles that I made around the same time DONT have this problem (thank god). When I started burning it, some strange ring of brown..stuff appeared. What's going on?!

Aha, I saw the new collection by CS. Seemed like pretty smart marketing imo, it's all about marketing!

Finally got around to finish burning these candles in case you were interested! Up until the last 20% I was sure that I underwicked these candles...but then it all caught up in the end. Pretty surprising results! Not sure how adding FO will change the burn characteristics, but it was a neat little experiment to run. I would be interested in trying another wick up to see the difference. This is the third burn around hour 5. Interestingly enough htp-73 burned the fastest and has the biggest shroom, but it might also be because I started with less wax? Can't quite remember!

Yes it does - and that does make sense to me. Thank you for sharing!

Hi everyone! Was hoping to get some advice from more experienced folks. How many jars do you purchase upfront when you started your business? I'm of the opinion that you should start small to test the market first, but the challenge with COVID is that the manufacturing side takes forever to ship. I purchased 48 jars to start but these jars took 3 weeks to deliver =O My thinking was to wait until I launch and gauge how well these jars sell before purchasing more, but I would be stuck waiting for another 3 weeks if they do sell...the idea of losing sales during this time is not ideal. So my question is, how do you decide how much inventory to purchase upfront? Do you sell small to gauge the market, or do you bet on yourself? Any advice is much appreciated!

Thank you @TallTayl ! I think you're right, I vaguely remember taking a 2nd pass at cutting those wicks with a blunt scissor yesterday. So I removed the wicks last night and put new ones in today. Made sure to use a sharper set of scissors this time and cut them only once. The results are SO interesting. Not only are they all burning as expected, the mushrooms have reduced noticeably! Here's a look at the 2nd burn with new wicks and sharper scissors, about 1.5hrs into the burn. *happy dance*. Really learning something new about wicks everyday!

Yep, I cured all of these for a little over 2 weeks!

6006 wax, HTP wicks, 8oz tin, no FO. I'm testing 3 different sized wicks and I'm really confused as to what's going on here. This is 2 hours into the 1st burn. HTP-62 seems to be burning the cleanest. Tin looks brightly lit and there's a tiny shroom but not bad. HTP-73 is really strange. Big shroom, and the flame seems to be burning below (?) the tip of the wick...which is making the entire tin less bright. HTP-83 also has a shrrom, but somehow even though the wick is bigger, the flame is burning at the tip of the wick, and the tin is brightly lit. I'm confused...why would the HTP-73 burn so differently than the others? (One caveat is that the 2 smaller wicks didn't start with a full tin, they were both slightly less than full. HTP-83 is the only tin that started full)