TheClassicModern

@CandleRush there was something definitely different about the batch I was having major issues with. I bought a new batch a couple of weeks ago, so I tested out both batches using my same blend. can we say a HUGE DIFFERENCE. The new batch came in solid, the old batch was extremely mushy like stiff mashed potatoes. Upon pouring the new batch cooled as soon as it was poured (which is normal based off of my previous purchases) the problematic batch took a really long time to cool and harden. The new batch had a smooth flawless finish like previous batches, the problematic batch had a not so smooth finish (kind of like soy wax). Now I know that I have to do a burn test for each batch I purchase. So from now on, I'm going to buy larger sizes instead of the 8.5lb size.

@TallTayl 8 oz tins (those are the only containers I've been working with) and those wicks work well for me. I did a test with plain wax using ECO 8, 10, 12, and 14. 8 tunneled; 10 burned through but left a little bit of hangup at the bottom of the tin; 12 burned great, I got a full melt pool on the 4th burn and throughout the entirety of the burn. I noticed a tall flame once I got into the 5th & 6th hour. 14 burned similar to the 12 but I got a full melt pool on the 2nd burn. When I added fragrance: ECO 10 would not create a full melt pool and just tunnel out (if I used a fragrance with a flashpoint over 160) ECO 12 burned just the way it did with the plain wax, but it struggled to create a full melt pool with high vanillin content and fragrances with a flashpoint higher than 200 ECO 14 worked like a 12 using high vanillin content fragrances like "Birthday Cake" from TFC.

I purchase the same wax and I really like it. I found that I have to add soy wax to the coconut wax to tame the flame. I yield the best results with ECO 12 wicks with my blend, the cottonwood wicks worked pretty well, but they slumped over as the wax burned down. ECO 14 work best for me when the fragrance oil has a high vanillin content.

I do believe it was the batch because I've been purchasing wax from them since last fall and I've only run into this problem on the most recent batch I purchased. I hope they don't discontinue this wax I do yield good results with it and changing to paraffin is not an option for me. I just purchased another batch last week so I'm hoping it's the way it has normally been.

I wicked down to Eco 6 & 8. IMO ECO 6 struggled and eventually it tunneled, ECO 8 made a full melt pool on about the 3rd burn down. I think I had a combination of things going on with this. This particular batch of coconut wax was definitely different than previous batches. I think the biggest factor in my blend using the soy wax. I've been using soy 444 to blend with my coconut wax and I have noticed that 444 is a very inconsistent wax. Because of the results of my coconut and soy blend, I decided to make a batch of straight 444. The results were crazy, the wax was extremely grainy and was really soft to the touch (almost like really thick mashed potatoes). Even after letting it cure for 7 days, the 444 never truly hardened. That was the last straw for me with 444. I bought some soy wax from Northwood and I was pleased with how smooth it was once I poured it. I'm going to test it tomorrow and if all goes well I'll stick with Northwood's soy to blend with my coconut wax.

I'm using coconut wax from Northwood. It cured for 1 week. I burned it for 4 hours on the first burn. No other additives (this time around). This batch was a lot different from the last batch that I bought from them, their wax normally has a nice smooth finish, but this particular batch looked like it had a lot more soy than advertised, the top was not really smooth. The previous batch I also needed to add 15% soy to tame the flames and that worked like a charm. But this time around the using the same blend I couldn't even get a full melt pool on the 4th or 5th burn. So I tried not adding any soy and I'm not getting a hot throw on the second burn.

I don't know if it's me, the fragrance oil, or the wax. I'm using "White Currant" by CandleScience and I have great hot throw on the first burn I mean a powerful hot throw, but for some reason on the second burn, the scent throw drops down that I can barely smell it when I walk in the room. I doubt if I've become nose blind to the scent because me son gives it a 3 on a scale of 10. I'm using a 3" tin container, coconut wax, an 8% fragrance load, and an ECO 10 wick. I think wicking up may just be too large of a wick for coconut wax, and 10% may be too large of a fragrance load for an ECO 10. Should I decrease the fragrance load? Any suggestions?

I agree. I used 1 tsp of stearic acid in 6 oz of coconut wax and I don't have a hot throw at all. I'm trying to find something to tame the tall flames that coconut wax tends to have. I can't rely on 444, because each batch is a hit or miss. I think I'll have to try maybe 1/2 tsp of stearic acid to 6 oz of coconut wax and see if that'll help. I also noticed that I have to wick up 2 sizes just using a teaspoon of stearic in 6 oz.

"Autumn Flannel" by The Flaming Candle is EXCELLENT. I had great hot throw and cold throw with that scent. It's the perfect fall scent that both men and women would enjoy.

A great starting point is woodenwick.com There's a guide to help you choose which wick works best your wax based off of diameter and height of your candle container. You can also purchase a sample pack with free shipping. Northstar3 and The Flaming Candle are 2 others that have wooden wicks. You can find them with several suppliers, but woodenwick in my opinion would be a great starting point.

@Jenni Wix what does SSGJ mean? I've been reading your post on different fragrances using 444 (I use that as well) great info!

Not the greatest pic but you can see how it twists down the length once it's burned.

I love everything about it! The label design is awesome, but what stands out to me the most is your "ABOUT" section, it's real, it's you, and people can relate, that's the best way to build your brand. Photography is great as well. As an Etsy seller myself, I would say change a tag or two to something like "Birthday Gift" or "Eco Friendly" and always reserve a flexible tag that can be changed with every season or holiday. I wish you nothing but the best!

@Ravens I purchased the ribbon wick from Northwood and I love them. They produce a larger, hotter flame than the ECO that I've used. For me they didn't work great in coconut oil, because it burns too hot, and because coconut wax gets too soft during the burn it starts to sag a bit making the wick off center. Did I mention as the wick burns it actually twist down the length of the wick ( I hope that makes sense). I used it in soy wax using an 8 oz anchor jar that has a 3" diameter and it worked EXCELLENT!

I tried 25% palm wax with my coconut wax and I got the same look you described and it didn't harden at all, it was actually softer than using the coconut wax alone.