country bee Posted October 29, 2014 Share Posted October 29, 2014 I was so excited to get this soap loaf mold,I made my soap and it is cooled and I can't get it apart to get my soap out.I have took the screws out-no problem -I have tried to slide the ends out of the grooves and nothing will come apart.Has any one used this thing to give me some instructions. Thanks a bunch. Quote Link to comment Share on other sites More sharing options...
Chefmom Posted November 1, 2014 Share Posted November 1, 2014 I use these molds all the time for hot process soap. The mold just pops out after 24 hours. With cold process I have read a LOT about soap sticking to the mold, and so the times I make CP I always line the mold with freezer paper. You could try loosening the soap very carefully with a butter knife along the edges, like loosening a cake from its pan before turning it out. You may mess up the sides and ends of the loaf depending on how soft the soap is. Or try to let it sit a little longer and see if it firms up enough for the soap to shrink and the mold sides come off better. Quote Link to comment Share on other sites More sharing options...
country bee Posted November 2, 2014 Author Share Posted November 2, 2014 Thanks,I did let it sit a day or more then the sides of the mold just lifted right off and the soap came out beautifully.This was my first time using it.I do love it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.